Detailed Parameters Of 19 Inch Industrial Grade LCD

Currently, there are many LCD screens of the same size on the market. Not only the brand differences, they are also divided into ordinary LCD screen and highlight LCD screen, the basic principle is the same is used in different places. One of the most important factors is industrial-grade LCD screens.

Displays used in industrial equipment are different from consumer products, which are generally used outdoors. Since it requires 24 hours, 365 days of uninterrupted work and power, and industrial displays are used in far harsher environments than TV displays used at home, they are required to be more stable. At the same time, the performance requirements of industrial display are higher than ordinary display, such as voltage, current, humidity, high and low temperature and so on. And the design direction is also different, for example, television power 8 hours will appear aging, and industrial display in high temperature, high humidity power 24 hours will appear aging phenomenon. The following is an introduction to the 19-inch screen parameters introduced by ruisheng outdoor highlight: a 19-inch a-si tft-lcd highlight liquid crystal module product introduced by ruisheng outdoor highlight, which is equipped with WLED backlight, no backlight drive, no touch. The operating temperature of this product is -30 ~ 85°C, the storage temperature is -30 ~ 85°C, and the vibration resistance is 1.5G (14.7 m/s ^ 2). Its typical feature screen library is summarized as: surface fog, wide perspective, landscape mode, wide temperature, white LED backlight, signal terminal formal installation. As a TN, normally white, transmittance liquid crystal module, this 19-inch High Brightness Lcd provides up to 1500 CD /m ^ 2 1,000:1 transmittance contrast, and 85/85/80/80 (Typ.) visual Angle, with a response time of 3/7 (Typ.) ms. Due to the use of 6-bit + hi-frc grayscale signal for each pixel, this product can display 16.7M color and its color saturation reaches 72% (NTSC). Backlight: this product adopts 12S4P WLED side light source (bottom), the service life of the light source is 30K hours, without backlight drive. G190etn01.1 adopts LVDS (2 ch, 8-bit) signal interface, with a total of 30 pins. It adopts terminal connection, and the screen drive voltage is 5.0v (Typ.). Its typical vertical refresh rate Fv is 60Hz!